Skip to content

Suggestions

Have a great idea that you’d like to see added to our service? Perhaps there’s an existing feature that you’d like to have extended or modified? Share it here!

I suggest you ...

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

466 results found

  1. Support Microsoft InTune Device Compliance

    It would be excellent for us if SimpleMDM were included in the list of InTune partners to add compliance state data to Azure Active Directory. This would allow us to establish conditional access policies in SimpleMDM that would be passed up to InTune and then Azure Active Directory, allowing us to ensure that devices used to log in are secure to our standards before access is granted.

    https://docs.microsoft.com/en-us/mem/intune/protect/device-compliance-partners

    80 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    5 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  2. Assign devices to user owners

    Assign the device to a user/owner for easier search.

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  3. Display/Add "Script description" while selecting a script to execute "New Job"

    Here are my feature request as detailed in my screenshot below

    When you have many scripts the name of the script is not enough to describe the script. The best would be to add a description in addition to the script name

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  4. Filter and Sort Devices columns within the Enrollment section

    When you go to the enrollment area of SimpleMDM and choose the enrollment method, in my case, the SimpleMDM Automated Enrollment using DEP. It will list ALL of the currently sync'd devices from ABM. This is a HUGE list and you cannot sort it or filter it whatsoever. I would like the option to filter by status, color, model, etc. as well as sort them all alphabetically.

    An even bigger improvement for this requested feature would be if you add checkboxes to each line item so you can bulk update them to assign to a specific group, etc. This makes…

    4 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  5. Custom Attribute value override listing

    Custom attributes can be set at the default, group, or device level.
    It would be really handy to have a way to see which group/device has a value that overrides the default value.

    I'd like to see a link style like Profiles to identify groups and devices that have custom value set for a specific attribute. The subsequent linked view would have each device and its value for that attribute.

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  6. Communicate New Shared App Versions to Administrators

    I would like to be able to have one or more SimpleMDM administrators in a SimpleMDM tenant be notified via email, Slack integration, or other methodologies when SimpleMDM's team adds a new version of a Shared Munki application to the Catalog.

    This would facilitate clearer communication of the existence of new app versions in a scenario where we are not simply choosing to install the latest version of everything from the Shared app catalog.

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  7. Limit API Scope to Group

    Would love the ability to limit a specific API key to only access specific group devices. I would like to develop something to wipe devices for some automation in some build farms, but would not want to give the users the ability to wipe any device from the key.

    2 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  8. allow download of native SimpleMDM Profiles

    Custom Configuration profiles are able to be downloaded from the portal but not profiles that were created in the SimpleMDM portal UI.

    As an admin it would be great to be able to download the raw profile from the server for a number of reasons:
    1) Documentation
    2) Version control
    3) Sanity of knowing what is being delivered to systems
    4) Save time to not have to find a machine with the profile scoped and parse the output of profiles, which isn't the raw profile in it's full either.

    Thanks,
    Eric

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  9. Assignment of apps with filter based on tags and/or model

    We have different sets of apps for iPhone and iPads. Right now I need to duplicate the device groups manually to be able to define which apps are supposed to be installed on iPhones and which on iPads.
    Having tags at the apps or being able to restrict apps to certain types of models would be supercool. I used this a lot when using Jamf.

    2 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  10. Display the Raw Payload Key when hovering over Human Readable descriptions

    Apple's documentation for payload keys (e.g. Restrictions - https://developer.apple.com/documentation/devicemanagement/restrictions) and the translated human readable description in the SimpleMDM Profile creation UI can cause confusion because what is described may not be obvious what key is actually being set.

    I suggest when hovering over the Simple UI description in the SimpleMDM portal the actual, raw payload Key be displayed so there is no confusion as to what preference that is setting.

    For instance, if I hover over "Allow restricting USB connections if locked" in the Restrictions Profile, it should show "allowUSBRestrictedMode".

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  11. Add drop downs to all the search boxes so I can either scroll through them or search for them.

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  12. Run scripts based off certain parameters.

    Ex: If certain apps aren’t downloaded when the Mac is scanned every hour it runs the specified script or scripts.

    Basically add If statements to install apps and run scripts.

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  13. Profiles API - add/set attributes for OS type, min and max OS version, and Mac architecture

    The current profiles API method to list all profiles doesn't return the scope data that is configured in the management console, and there are no means to set these attributes via API methods (per https://api.simplemdm.com/#profiles as at 2022-09-26).

    Please update the list all and retrieve one methods to return this scope data.

    Please also add a method to update existing profiles with values for this scope data.

    The scope attributes specifically are:
    - setting the OS type
    - setting the minimum macOS version the profile can be installed on
    - setting the maximum macOS version the profile can be installed…

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  14. Allow Log Filter to Include API

    Currently when filtering the Logs, you can filter by the user making the change, but you cannot filter by API key. I would like the ability to quickly see the recent logs that the API has made.
    This may be classified as a bug, but was asked to submit here anyway.

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  15. Document webhook metadata fields

    Please document the format of webhook events, including which fields are included with each type.

    3 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  16. Managed Application Installation Status

    There should be some way in the console (and API) to see the installation status of apps deployed through SimpleMDM, using statuses like "Installed", "Pending", "Error", etc.

    Currently, you can see which apps are installed on a device, but there's no way to identify applications that should or will be installed, whether we're waiting for the device to come online, or if there's been an error in the installation process.

    In a standalone Munki environment I would could use Sal/MunkiReport as requested in https://suggestions.simplemdm.com/forums/204404-suggestions/suggestions/40754131-integrate-munkireport-or-sal

    Alternately, I can also forward the Munki logs in /Library/Managed Installs/Logs to a SEIM like Splunk…

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  17. Move Rosetta 2 install from global enrollments to per enrollment groups

    Some of our enrollments need Rosetta 2, while others we do not want them. We have to resort to adding a package to the groups that need them. It would be nice to have this option.

    2 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  18. Expose Custom App "Pre-stage priority" in API

    The Custom App Screen (https://a.simplemdm.com/admin/apps/{APP_ID}) allows for a configurable "Pre-stage priority" for Device-level App Installation during DEP enrollment. This value has a pre-set range of 0-10 (inclusive) available in the UI.

    Please update the Application API (https://a.simplemdm.com/api/v1/apps/) to:

    1. Expose the "Pre-stage Priority" value on all List/Retrieve responses for /api/v1/apps/
    2. Allow for setting the "Pre-stage Priority" during App Creation and App Update

    Background:

    My organization is installing multiple Installer Packages during initial DEP enrollment, where some packages must be installed before others. We're currently managing this via manual uploads in the web console after our CI/CD process.…

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  19. Add wireguard as a supported app

    This is a good VPN solution and should be added as one of your supported VPN solutions

    5 votes
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close

  20. Implement application signature expiration to SimpleMDM API

    We need to be able to actively monitor application signature expiration which is not available through the API now.

    1 vote
    Vote

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
    You have left! (?) (thinking…)
    0 comments  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback
    Signed in as (Sign out)
    Close
    Close
1 2 … 8 10 12 … 23 24
  • Don't see your idea?

Suggestions

Categories

Feedback and Knowledge Base

(thinking…)